Ceramic Screw (Fastener) Metric [Flat Countersunk]

The standard price chart of Flat head ceramic screw.

Ceramic Countersunk screw standard - Metric type

Minimum Sales Quantity : 20pcs / 1 Model IDMore than 500pcs : 10% Off
Flat Countersunk [Metric] mm Al2O3 [Alumina] Price ZrO3 [Zirconia] Price Drawing
Size Pitch a L l Model ID JPY Model ID JPY
M1.8 0.35 3.25 5 4 - - ZSM1.8-05 1680 Drawing
M2 0.4 3.65 5 2.8 ASM02-05 840 ZSM02-05 1280 Drawing
8 5.3 ASM02-08 880 ZSM02-08 1360 Drawing
10 7.3 ASM02-10 930 ZSM02-10 1420 Drawing
12 9.8 ASM02-12 990 ZSM02-12 1500 Drawing
M2.2 0.45 4 5 2.8 ASM2.2-05 1150 ZSM2.2-05 1710 Drawing
M2.5 0.45 4.55 5 2.8 ASM2.5-05 1240 ZSM2.5-05 1780 Drawing
M2.6 0.45 4.7 5 2.8 ASM2.6-05 1280 ZSM2.6-05 1870 Drawing
M3 0.5 5.35 5 2.3 ASM03-05 800 ZSM03-05 1260 Drawing
8 4.8 ASM03-08 830 ZSM03-08 1290 Drawing
10 6.8 ASM03-10 840 ZSM03-10 1320 Drawing
12 8.8 ASM03-12 880 ZSM03-12 1390 Drawing
16 12.8 ASM03-16 950 ZSM03-16 1480 Drawing
20 15 ASM03-20 1040 ZSM03-20 1570 Drawing
M4 0.7 8.2 8 3.8 ASM04-08 840 ZSM04-08 1320 Drawing
10 5.8 ASM04-10 880 ZSM04-10 1390 Drawing
12 7.8 ASM04-12 930 ZSM04-12 1470 Drawing
16 11.8 ASM04-16 970 ZSM04-16 1540 Drawing
20 15 ASM04-20 1120 ZSM04-20 1760 Drawing
25 15 ASM04-25 1200 ZSM04-25 1870 Drawing
M5 0.8 9.2 8 3.8 ASM05-08 880 ZSM05-08 1390 Drawing
10 5.8 ASM05-10 930 ZSM05-10 1470 Drawing
12 7.8 ASM05-12 980 ZSM05-12 1540 Drawing
16 11.8 ASM05-16 1030 ZSM05-16 1610 Drawing
20 15 ASM05-20 1170 ZSM05-20 1840 Drawing
25 15 ASM05-25 1260 ZSM05-25 1980 Drawing
30 15 ASM05-30 1350 ZSM05-30 2090 Drawing
M6 1 11.1 8 3.2 ASM06-08 980 ZSM06-08 1540 Drawing
10 5.2 ASM06-10 1030 ZSM06-10 1610 Drawing
12 7.2 ASM06-12 1070 ZSM06-12 1690 Drawing
16 11.2 ASM06-16 1170 ZSM06-16 1840 Drawing
20 15 ASM06-20 1260 ZSM06-20 1980 Drawing
25 15 ASM06-25 1300 ZSM06-25 2050 Drawing
30 15 ASM06-30 1360 ZSM06-30 2130 Drawing
35 15 ASM06-35 1420 ZSM06-35 2220 Drawing
40 15 ASM06-40 1500 ZSM06-40 2330 Drawing
M8 1.25 13 10 3.8 ASM08-10 1070 - - Drawing
12 5.3 ASM08-12 1170 - - Drawing
16 9.8 ASM08-16 1210 - - Drawing
20 13 ASM08-20 1300 - - Drawing
25 15 ASM08-25 1360 - - Drawing
30 15 ASM08-30 1400 - - Drawing
35 15 ASM08-35 1450 - - Drawing
40 15 ASM08-40 1500 - - Drawing
45 15 ASM08-45 1580 - - Drawing
M10 1.5 16 10 3.5 ASM10-10 1170 - - Drawing
12 5.5 ASM10-12 1210 - - Drawing
16 9.5 ASM10-16 1260 - - Drawing
20 13 ASM10-20 1360 - - Drawing
25 15 ASM10-25 1400 - - Drawing
30 15 ASM10-30 1450 - - Drawing
35 15 ASM10-35 1490 - - Drawing
40 15 ASM10-40 1540 - - Drawing
45 15 ASM10-45 1610 - - Drawing
KDA Ceramic Screws are suitable for RoHS.
There is a possibility to change this price chart above without notice.

Inquiry, Request Estimate and Purchase order.

 






 

Ceramic Factory (KDA Corporation) 4-13-6 Nakarokugo Ohta-ku TOKYO JAPAN
TEL +81-(0)3-3733-3851 FAX 3853 [MAP]