Ceramic Screw (Fastener) Metric [Pan head gas hole]

The standard price chart of Pan head gas hole screw.

Ceramic Screw Pan head gas hole standard - Metric type

Minimum Sales Quantity : 20pcs / 1 Model IDMore than 500pcs : 10% Off
Pan head gas hole [Metric] mm Al2O3 [Alumina] Price ZrO3 [Zirconia] Price Drawing
Size Pitch a b L l Model ID JPY Model ID JPY
M2 0.4 3.85 1.53 3 2 ANSHM02-03 900 ZNSHM02-03 1310 Drawing
5 4 ANSHM02-05 950 ZNSHM02-05 1390 Drawing
8 6.5 ANSHM02-08 990 ZNSHM02-08 1470 Drawing
10 8.5 ANSHM02-10 1060 ZNSHM02-10 1560 Drawing
M2.5 0.45 4.85 2.03 5 4 ANSHM2.5-05 950 ZNSHM2.2-05 1450 Drawing
8 6.5 ANSHM2.5-08 990 ZNSHM2.5-05 1510 Drawing
M3 0.5 5.45 2.3 5 4 ANSHM03-05 900 ZNSHM03-05 1360 Drawing
8 6.5 ANSHM03-08 930 ZNSHM03-08 1410 Drawing
10 8.5 ANSHM03-10 950 ZNSHM03-10 1430 Drawing
12 10.5 ANSHM03-12 990 ZNSHM03-12 1500 Drawing
16 14.5 ANSHM03-16 1060 ZNSHM03-16 1590 Drawing
20 15 ANSHM03-20 1150 ZNSHM03-20 1700 Drawing
M4 0.7 7.8 3 8 6.5 ANSHM04-08 950 ZNSHM04-08 1430 Drawing
10 8.5 ANSHM04-10 980 ZNSHM04-10 1500 Drawing
12 10.5 ANSHM04-12 990 ZNSHM04-12 1580 Drawing
16 14.5 ANSHM04-16 1050 ZNSHM04-16 1650 Drawing
20 15 ANSHM04-20 1250 ZNSHM04-20 1870 Drawing
25 15 ANSHM04-25 1350 ZNSHM04-25 2010 Drawing
M5 0.8 9.3 3.6 8 6.5 ANSHM05-08 980 ZNSHM05-08 1500 Drawing
10 8.5 ANSHM05-10 990 ZNSHM05-10 1580 Drawing
12 10.5 ANSHM05-12 1020 ZNSHM05-12 1650 Drawing
16 14.5 ANSHM05-16 1050 ZNSHM05-16 1720 Drawing
20 15 ANSHM05-20 1250 ZNSHM05-20 1940 Drawing
25 15 ANSHM05-25 1350 ZNSHM05-25 2090 Drawing
30 15 ANSHM05-30 1450 ZNSHM05-30 2250 Drawing
M6 1 11.8 4.5 8 6.5 ANSHM06-08 990 ZNSHM06-08 1650 Drawing
10 8.5 ANSHM06-10 1020 ZNSHM06-10 1720 Drawing
12 10.5 ANSHM06-12 1040 ZNSHM06-12 1800 Drawing
16 14.5 ANSHM06-16 1070 ZNSHM06-16 1940 Drawing
20 15 ANSHM06-20 1270 ZNSHM06-20 2090 Drawing
25 15 ANSHM06-25 1390 ZNSHM06-25 2160 Drawing
30 15 ANSHM06-30 1450 ZNSHM06-30 2240 Drawing
35 15 ANSHM06-35 1530 ZNSHM06-35 2330 Drawing
40 15 ANSHM06-40 1640 ZNSHM06-40 2440 Drawing
M8 1.25 15.8 5.85 10 8.5 ANSHM08-10 1150 - - Drawing
12 10.5 ANSHM08-12 1250 - - Drawing
16 14.5 ANSHM08-16 1290 - - Drawing
20 15 ANSHM08-20 1390 - - Drawing
25 15 ANSHM08-25 1450 - - Drawing
30 15 ANSHM08-30 1490 - - Drawing
35 15 ANSHM08-35 1540 - - Drawing
40 15 ANSHM08-40 1630 - - Drawing
45 15 ANSHM08-45 1740 - - Drawing
KDA Ceramic Screws are suitable for RoHS.
There is a possibility to change this price chart above without notice.

Inquiry, Request Estimate and Purchase order.

 






 

Ceramic Factory (KDA Corporation) 4-13-6 Nakarokugo Ohta-ku TOKYO JAPAN
TEL +81-(0)3-3733-3851 FAX 3853 [MAP]